Delton PC-80D Manual de usuario descargar pdf (Pagina 13)

User Manual for PC-80D Easy ECG Monitor

4.2 Measuring procedure

4.2.1 Preparing Phase

The quick measurement is as following for details:

At default menu screen, press “

” measure key to enter into the quick measuring screen directly, as shown in figure 4-7, in addition, at the

beginning of measurement (including quick and long term measurement), the preparing phase shows on the screen with a heart beat icon and counting

down seconds, the beeper will sound with the counting down at the interval of one second.

During this period the device will check the signal quality and auto scale the display. Please adjust your holding position if the detected waveform is

not smooth or poor signal and it may prompt:“Check well-connection with lead wires.”

4.2.2 Quick measurement by built-in electrodes

Please refer to the section 4.1 “Hand measurement” to make the electrodes well-connection with skin. At default menu screen, press “ ” measure

key can enter into quick measurement preparing screen directly, after 10 seconds, it will enter into the measuring screen, as shown in Figure 4-8. The

measuring time lasts for about 30 seconds.

4.3Long term measurement by external lead wires

There are 2 options (limb lead and chest lead) for long term measurement by external electrodes. The detail information about the electrodes

placement is described in section 4.1.

Figure 4-9measuring（chest lead ）

Figure 4-7 (quick measurement)

Figure 4-8 (quick measurement)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 38 39

Comentarios a estos manuales

Sin comentarios

Delton PC-80D Manual de usuario Pagina 13

Comentarios a estos manuales

Relacionado con productos y manuales para De medición, control y control Delton PC-80D